Model TT 2100 Tensile Testers
TT2100 Series Tensile Testers can show realtime force and elongation on a computer monitor as the force and elongation values change.
The TT2100 series was designed to determine tensile strength and elongation for most materials and components. These testers offer accurate and reliable test results for production, quality assurance, and research needs. A wide range of testing capabilities are possible including tensile, elongation, compression, shear, peel, flexural, and proof of load for most materials and components. The TT2100 can replace many specific testers and computerize the data-acquisition functions.
Sort by
Display
per page
| Item # | Series | Universal Tester Capacity | Maximum Speed at Capacity | Minimum Speed | Return Speed | Power Requirements | |
|---|---|---|---|---|---|---|---|
| Model TT 2100 | TT 2100 | 250 lb | Standard: 30 in/min Standard: 760 mm/min |
Standard: 0.1 in/min Standard: 2.5 mm/min |
30 in/min 762 mm/min |
Standard: 110/120 V, 60 Hz, 1 phase Optional: 220/240 V, 50-60 Hz, 1 phase |
|
| Model TT 2101 | TT 2100 | 1000 lb | Standard: 30 in/min Standard: 760 mm/min |
Standard: 0.1 in/min 2.5 mm/min |
30 in/min 762 mm/min |
Standard: 110/120 V, 60 Hz, 1 phase Optional: 220/240 V, 50-60 Hz, 1 phase |
|
| Model TT 2102 | TT 2100 | 2000 lb | Standard: 30 in/min Standard: 760 mm/min |
Standard: 0.1 in/min 2.5 mm/min |
30 in/min 762 mm/min |
Standard: 110/120 V, 60 Hz, 1 phase Optional: 220/240 V, 50-60 Hz, 1 phase |
|
| Model TT 2105 | TT 2100 | 5000 lb | Standard: 30 in/min Standard: 760 mm/min |
Standard: 0.1 in/min 2.5 mm/min |
30 in/min 762 mm/min |
Standard: 110/120 V, 60 Hz, 1 phase Optional: 220/240 V, 50-60 Hz, 1 phase |
|
| Model TT 2110 | TT 2100 | 10000 lb | Standard: 30 in/min Standard: 760 mm/min |
Standard: 0.1 in/min 2.5 mm/min |
30 in/min 762 mm/min |
Standard: 110/120 V, 60 Hz, 1 phase Optional: 220/240 V, 50-60 Hz, 1 phase |
