Model TT 2105, Model TT 2100 Tensile Testers

Series TT 2100
Universal Tester Capacity 5000 lb
Maximum Speed at Capacity Standard: 30 in/min
Standard: 760 mm/min
Minimum Speed Standard: 0.1 in/min
2.5 mm/min
Return Speed 30 in/min
762 mm/min
Power Requirements Standard: 110/120 V, 60 Hz, 1 phase
Optional: 220/240 V, 50-60 Hz, 1 phase
Travel 36 in
Capacity at Full Speed Standard: 250 lbf
Standard: 100 kgf
Optional: 10 lb
Optional: 25 lb
Optional: 50 lb
Optional: 100 lb
Load Cell Accuracy ± 0.20 % of full scale
Speed Accuracy ± 0.25 % of set speed
Crosshead Travel 36 in
882 mm
Frame Type Table Top
Height 48 in
1200 m
Width 12 in
300 mm
Depth 20 in
500 mm
Weight 100 lb
45 kg
Computer IBM compatible
Monitor1 SVGA color
Software Optional: Tear, peel, cof, ballburst
Standard: Tensile/Elongation
Operating Temperature 50 to 100 ºF
10 to 38 ºC
Storage Temperature 4 to 140 ºF
-20 to 60 ºC
Voltage Optional: 220/240 V
Standard: 110/120 V
Frequency Standard: 60 Hz
Optional: 50 to 60 Hz
Phase 1
Benzwin Software

Benzwin Software provides data acquisition and reanalysis of past results, through test curve display and statistical analysis summary. Test data is easily exported to most word processing, spreadsheet and SPC software.

Features
  • Affordable, reliable design increases testing-budget buying power
  • Simple to use - ready-to-test - software speeds setup time
  • Maximum tests per hour - uninterrupted "load & go" operation
  • Precise, reproducible results - assures quality results
  • Compact design answers space problems
  • Custom reports can be generated, per your specifications

Other system features include an emergency stop switch and programmed safety limits to eliminate load cell overload.
General Description

This instrument offers accurate and reliable test results for production, quality assurance, and research needs. Standard load frames range in capacity from 250 lbf to 10,000 lbf (455 kgf to 9,090 kgf), and up to 35" (915mm) crosshead travel.

The TT2100's are available with a complete line of accessories: grips, fixtures, adapters, environmental chamber and extensometers.

Other system features include an emergency stop switch and programmed safety limits to eliminate load cell overload.

Software provides data acquisition and reanalysis of past results, through test curve display and statistical analysis summary. Test data is easily exported to most word processing, spreadsheet and SPC software.


1 Or current available equipment

TT2100 Series Tensile Testers can show realtime force and elongation on a computer monitor as the force and elongation values change.

The TT2100 series was designed to determine tensile strength and elongation for most materials and components. These testers offer accurate and reliable test results for production, quality assurance, and research needs. A wide range of testing capabilities are possible including tensile, elongation, compression, shear, peel, flexural, and proof of load for most materials and components. The TT2100 can replace many specific testers and computerize the data-acquisition functions.